View N9020B_8617896.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

keysight technologies mxa x-series signal analyzer, multi-touch N9020B 10 hz to 3.6, 8.4, 13.6, or 26.5 ghz data sheet
02 | keysight | N9020B mxa x-series signal analyzer, multi-touch - data sheet this data sheet is a summary of the specifcations and conditions for mxa signal analyzers. for the complete specifcations guide, visit: www.keysight.com/fnd/mxa_specifcations quickly adapt to evolving test requirements every device demands decisions that require tradeoffs in your goalscustomer specs, through - put, yield. with a highly fexible signal analyzer, you can manage and minimize those tradeoffs. keysight technologies inc.s mid-performance mxa is the optimum choice for wireless as you take new-generation devices to market. it has the fexibility to quickly adapt to evolving test re - quirements, today and tomorrow. table of contents defnitions and conditions ............................................................................................... 3 frequency and time specifcations ................................................................................. 4 amplitude accuracy and range specifcations .............................................................. 6 dynamic range specifcations ......................................................................................... 8 powersuite measurement specifcations ........................................................................ 11 general specifcations ...................................................................................................... 12 inputs and outputs ........................................................................................................... 13 iq analyzer ........................................................................................................................ 15 iq analyzer option b40 ................................................................................................. 16 iq analyzer option b85/b1a/b1x ................................................................................ 17 real-time spectrum analyzer (rtsa) ............................................................................. 18
03 | keysight | N9020B mxa x-series signal analyzer, multi-touch - data sheet get more information this mxa signal analyzer data sheet is a summary of the specif - cations and conditions for N9020B mxa signal analyzers. a full set of specifcations are available in the mxa signal analyzer specifcation guide at www.keysight.com/fnd/ mxa_specifcations. for ordering information, refer to the N9020B mxa signal analyzer confguration guide (literature number 5992-1256en). defnitions and conditions specifcations describe the performance of parameters covered by the product warranty and apply to the full temperature range of 0 to 55 c, unless otherwise noted. 95th percentile values indicate the breadth of the population (approx. 2 ) of perfor - mance tolerances expected to be met in 95 percent of the cases with a 95 percent confdence, for any ambient temperature in the range of 20 to 30 c. in addition to the statistical observations of a sample of instruments, these values include the effects of the uncertainties of external calibration references. these values are not warranted. these values are updated occasionally if a signifcant change in the statistically observed behavior of production instruments is observed. typical describes additional product performance information that is not covered by the product warranty. it is performance beyond specifcations that 80 percent of the units exhibit with a 95 percent confdence level over the temperature range 20 to 30 c. typi - cal performance does not include measurement uncertainty. nominal values indicate expected performance, or describe product performance that is useful in the application of the product, but are not covered by the product warranty. the analyzer will meet its specifcations when: C it is within its calibration cycle C under auto couple control, except when auto sweep time rules = accy C signal frequencies < 10 mhz, with dc coupling applied C the analyzer has been stored at an ambient temperature within the allowed oper - ating range for at least two hours before being turned on; if it had previously been stored at a temperature range inside the allowed storage range, but outside the allowed operating range C the analyzer has been turned on at least 30 minutes with auto align set to nor - mal, or if auto align is set to off or partial, alignments must have been run recently enough to prevent an alert message. if the alert condition is changed from time and temperature to one of the disabled duration choices, the analyzer may fail to meet specifcations without informing the user. if auto align is set to light, perfor - mance is not warranted, and nominal performance will degrade to become a factor of 1.4 wider for any specifcation subject to alignment, such as amplitude tolerances
04 | keysight | N9020B mxa x-series signal analyzer, multi-touch - data sheet frequency and time specifcations frequency range dc coupled ac coupled option 503 10 hz to 3.6 ghz 10 mhz to 3.6 ghz option 508 10 hz to 8.4 ghz 10 mhz to 8.4 ghz option 513 10 hz to 13.6 ghz 10 mhz to 13.6 ghz option 526 10 hz to 26.5 ghz 10 mhz to 26.5 ghz band lo multiple (n) 0 1 10 hz to 3.6 ghz 1 1 3.5 to 8.4 ghz 2 2 8.3 to 13.6 ghz 3 2 13.5 to 17.1 ghz 4 4 17 to 26.5 ghz frequency reference accuracy [(time since last adjustment x aging rate) + temperature stability + calibration accuracy] aging rate option pfr 1 x 10 C7 / year 1.5 x 10 C7 / 2 years standard 1 x 10 C6 / year temperature stability option pfr standard C 20 to 30 c 1.5 x 10 C8 2 x 10 C6 C full temperature range 5 x 10 C8 2 x 10 C6 achievable initial calibration accuracy option pfr 4 x 10 C8 standard 1.4 x 10 C6 example frequency reference accuracy (with option pfr) 1 year after last adjustment = (1 x 1 x 10 C7 + 5 x 10 C8 + 4 x 10 C8 ) = 1.9 x 10 C7 residual fm C option pfr (0.25 hz x n) p-p in 20 ms, nominal C standard (10 hz x n) p-p in 20 ms, nominal see band table above for n (lo multiple) frequency readout accuracy (start, stop, center, marker) (marker frequency x frequency reference accuracy + 0.25 % x span + 5 % x rbw + 2 hz + 0.5 x horizontal resolution 1 ) marker frequency counter accuracy (marker frequency x frequency reference accuracy + 0.100 hz) delta counter accuracy (delta frequency x frequency reference accuracy + 0.141 hz) counter resolution 0.001 hz frequency span (fft and swept mode) range 0 hz (zero span), 10 hz to maximum frequency of instrument resolution 2 hz accuracy C swept (0.25 % x span + horizontal resolution) C fft (0.10 % x span + horizontal resolution) 1. horizontal resolution is span/(sweep points C 1).
05 | keysight | N9020B mxa x-series signal analyzer, multi-touch - data sheet frequency and time specifcations (continued) sweep time and triggering range span = 0 hz span 10 hz 1 s to 6000 s 1 ms to 4000 s accuracy span 10 hz, swept span 10 hz, fft span = 0 hz 0.01 %, nominal 40 %, nominal 0.01 %, nominal trigger free run, line, video, external 1, external 2, rf burst, periodic timer trigger delay span = 0 hz or fft span 10 hz, swept resolution C150 to +500 ms 0 to 500 ms 0.1 s time gating C gate methods C gate length range (except method = fft) C gate delay range C gate delay jitter gated lo; gated video; gated fft 100.0 ns to 5.0 s 0 to 100.0 s 33.3 ns p-p, nominal sweep (trace) point range all spans 1 to 40001 resolution bandwidth (rbw) range (C3.01 db bandwidth) 1 hz to 3 mhz (10 % steps), 4, 5, 6, 8 mhz bandwidth accuracy (power) 1 hz to 750 khz 820 khz to 1.2 mhz (< 3.6 ghz cf) 1.3 to 2 mhz (< 3.6 ghz cf) 2.2 to 3 mhz (< 3.6 ghz cf) 4 to 8 mhz (< 3.6 ghz cf) 1.0 % ( 0.044 db) 2.0 % ( 0.088 db) 0.07 db, nominal 0.15 db, nominal 0.25 db, nominal bandwidth accuracy (C3.01 db) C rbw range 1 hz to 1.3 mhz 2 %, nominal selectivity (C60 db/C3 db) 4.1:1, nominal emi bandwidth (cispr compliant) 200 hz, 9 khz, 120 khz, 1 mhz (option emc required) emi bandwidth (mil std 461e compliant) 10 hz, 100 hz, 1 khz, 10 khz, 100 khz, 1 mhz (standard) (option emc required) analysis bandwidth 1 maximum bandwidth option b1x option b1a option b85 option b40 option b25 (standard) 160 mhz 125 mhz 85 mhz 40 mhz 25 mhz video bandwidth (vbw) range 1 hz to 3 mhz (10 % steps), 4, 5, 6, 8 mhz, and wide open (labeled 50 mhz) accuracy 6 %, nominal 1. analysis bandwidth is the instantaneous bandwidth available around a center frequency over which the input signal can be digitized for further analysis or process - ing in the time, frequency, or modulation domain.
06 | keysight | N9020B mxa x-series signal analyzer, multi-touch - data sheet amplitude accuracy and range specifcations amplitude range measurement range preamp off displayed average noise level (danl) to +30 dbm preamp on displayed average noise level (danl) to +30 dbm input attenuator range 0 to 70 db in 2 db steps electronic attenuator (option ea3) frequency range 10 hz to 3.6 ghz attenuation range C electronic attenuator range C full attenuation range (mechanical + electronic) 0 to 24 db, 1 db steps 0 to 94 db, 1 db steps maximum safe input level average total power (with and without preamp) +30 dbm (1 w) peak pulse power < 10 s pulse width, < 1 % duty cycle +50 dbm (100 w) and input attenuation 30 db dc volts C dc coupled C ac coupled 0.2 vdc 100 vdc display range log scale 0.1 to 1 db/division in 0.1 db steps 1 to 20 db/division in 1 db steps (10 display divisions) linear scale 10 divisions scale units dbm, dbmv, dbv, dbma, dba, v, w, a frequency response specifcation 95th percentile ( 2 s ) (10 db input attenuation, 20 to 30 c, preselector centering applied, s = nominal standard deviation) 20 hz to 10 mhz 10 mhz 1 to 3.6 ghz 3.5 to 8.4 ghz 8.3 to 13.6 ghz 13.5 to 22.0 ghz 22.0 to 26.5 ghz 0.6 db 0.45 db 1.5 db 2.0 db 2.0 db 2.5 db 0.28 db 0.17 db 0.48 db 0.47 db 0.52 db 0.71 db preamp on (0 db attenuation) 100 khz to 3.6 ghz 3.5 to 8.4 ghz 8.3 to 13.6 ghz 13.5 to 17.1 ghz 17.0 to 22.0 ghz 22.0 to 26.5 ghz 0.75 db 2.0 db 2.3 db 2.5 db 2.5 db 3.5 db 0.28 db 0.67 db 0.73 db 0.97 db 1.36 db 1.48 db input attenuation switching uncertainty specifcations additional information attenuation > 2 db, preamp off relative to 10 db (reference setting) 50 mhz (reference frequency) 20 hz to 3.6 ghz 3.5 to 8.4 ghz 8.3 to 13.6 ghz 13.5 to 26.5 ghz 0.20 db 0.08 db, typical 0.3 db, nominal 0.5 db, nominal 0.7 db, nominal 0.7 db, nominal 1. dc coupling required to meet specifcations below 50 mhz. with ac coupling, specifcations apply at frequencies of 50 mhz and higher. statistical ob - servations at 10 mhz with ac coupling show that most instruments meet the dc-coupled specifcations, however, a small percentage of instruments are expected to have errors exceeding 0.5 db at 10 mhz at the temperature extreme. the effect at 20 to 50 mhz is negligible but not warranted.
07 | keysight | N9020B mxa x-series signal analyzer, multi-touch - data sheet amplitude accuracy and range specifcations (continued) total absolute amplitude accuracy specifcations (10 db attenuation, 20 to 30 c, 1 hz rbw 1 mhz, input signal C10 to C50 dbm, all settings auto-coupled except auto swp time = accy, any reference level, any scale, s = nominal standard deviation) at 50 mhz at all frequencies 20 hz to 3.6 ghz 0.33 db (0.33 db + frequency response) 0.23 db (95th percentile 2 s ) preamp on at all frequencies (0.39 db + frequency response) input voltage standing wave ratio (vswr) ( 10 db input attenuation) 10 mhz to 3.6 ghz 3.6 to 8.4 ghz 8.4 to 13.6 ghz 13.6 to 26.5 ghz < 1.2:1, nominal < 1.5:1, nominal < 1.6:1, nominal < 1.9:1, nominal preamp on (0 db attenuation) 10 mhz to 3.6 ghz 3.6 to 8.4 ghz 8.4 to 13.6 ghz 13.6 to 26.5 ghz < 1.7:1, nominal < 1.8:1, nominal < 2.0:1, nominal < 2.0:1, nominal resolution bandwidth switching uncertainty (referenced to 30 khz rbw) 1 hz to 1.5 mhz rbw 0.05 db 1.6 mhz to 3 mhz rbw 0.10 db 4, 5, 6, 8 mhz rbw 1.0 db reference level range C log scale C170 to +30 dbm in 0.01 db steps C linear scale same as log (707 pv to 7.07 v) accuracy 0 db display scale switching uncertainty switching between linear and log 0 db log scale/div switching 0 db display scale fdelity between C10 dbm and C80 dbm input mixer level 0.10 db total trace detectors normal, peak, sample, negative peak, log power average, rms average, and voltage average preamplifer frequency range option p03 option p08 option p13 option p26 100 khz to 3.6 ghz 100 khz to 8.4 ghz 100 khz to 13.6 ghz 100 khz to 26.5 ghz gain 100 khz to 3.6 ghz 3.6 to 26.5 ghz +20 db, nominal +35 db, nominal noise fgure 100 khz to 3.6 ghz 3.6 to 8.4 ghz 8.4 to 13.6 ghz 13.6 to 26.5 ghz 11 db, nominal 9 db, nominal 10 db, nominal 15 db, nominal
08 | keysight | N9020B mxa x-series signal analyzer, multi-touch - data sheet dynamic range specifcations 1 db gain compression (two-tone) total power at input mixer 20 to 500 mhz 500 mhz to 3.6 ghz 3.6 to 26.5 ghz 0 dbm 3 dbm 0 dbm +3 dbm, typical +5 dbm, typical +4 dbm, typical preamp on (option p03, p08, p13, p26) 10 mhz to 3.6 ghz 3.6 to 26.5 ghz C tone spacing 100 khz to 20 mhz C tone spacing > 70 mhz C14 dbm, nominal C26 dbm, nominal C16 dbm, nominal displayed average noise level (danl) (input terminated, sample or average detector, averaging type = log, 0 db input attenuation, if gain = high, 1 hz rbw, 20 to 30 c) specifcation typical 10 hz 20 hz 100 hz 1 khz 9 khz to 1 mhz 1 to 10 mhz 10 mhz to 2.1 ghz 2.1 to 3.6 ghz 3.6 to 8.4 ghz 8.3 to 13.6 ghz 13.5 to 17.1 ghz 17.0 to 20.0 ghz 20.0 to 26.5 ghz C150 dbm C151 dbm C149 dbm C149 dbm C14 8 dbm C14 4 dbm C14 3 dbm C136 dbm C95 dbm, nominal C105 dbm, nominal C110 dbm, nominal C120 dbm, nominal C130 dbm C153 dbm C154 dbm C152 dbm C153 dbm C151 dbm C147 dbm C146 dbm C142 dbm preamp on (option p03, p08, p13, p26) 100 khz to 1 mhz 1 to 10 mhz 10 mhz to 2.1 ghz 2.1 to 3.6 ghz 3.6 to 8.4 ghz 8.3 to 13.6 ghz 13.5 to 17.1 ghz 17.0 to 20.0 ghz 20.0 to 26.5 ghz C161 dbm C163 dbm C162 dbm C162 dbm C162 dbm C159 dbm C157 dbm C152 dbm C149 dbm, nominal C163 dbm C166 dbm C16 4 dbm C166 dbm C165 dbm C163 dbm C161 dbm C157 dbm danl with noise floor extension (option nfe 1 ) on improvement @ 95th percentile frequency band preamp off preamp on band 0, f > 20 mhz 9 db 10 db band 1 8 db 9 db band 2 10 db 10 db band 3 9 db 10 db band 4 9 db 9 db example of effective danl @ 20 to 30 c (option nfe on) frequency preamp off preamp on mid-band 0 (1.8 ghz) C159 dbm C170 dbm mid-band 1 (5.9 ghz) C157 dbm C169 dbm mid-band 2 (10.95 ghz) C157 dbm C168 dbm mid-band 3 (15.3 ghz) C151 dbm C165 dbm mid-band 4 (21.75 ghz) C146 dbm C159 dbm 1. option nfe on mxa is installed as N9020B-nf2, instrument alignment based.
09 | keysight | N9020B mxa x-series signal analyzer, multi-touch - data sheet dynamic range specifcations (continued) spurious responses residual responses (input terminated and 0 db attenuation) 200 khz to 8.4 ghz (swept) zero span or fft or other frequencies C100 dbm C100 dbm, nominal image responses 10 mhz to 3.6 ghz 3.6 to 13.6 ghz 13.6 to 17.1 ghz 17.1 to 22 ghz 22 to 26.5 ghz C80 dbc (C108 dbc, typical) C78 dbc (C87 dbc, typical) C74 dbc (C85 dbc, typical) C70 dbc (C81 dbc, typical) C68 dbc (C77 dbc, typical) lo related spurious (f > 600 mhz from carrier) 10 mhz to 3.6 ghz C90 dbc, typical other spurious f 10 mhz from carrier C80 dbc + 20xlogn 1 second harmonic distortion (shi) source frequency mixer level distortion shi 10 mhz to 1.1 ghz 1.1 to 1.8 ghz 1.75 to 6.5 ghz 6.5 to 11 ghz 11 to 13.25 ghz C15 dbm C15 dbm C15 dbm C15 dbm C15 dbm C60 dbc C56 dbc C80 dbc C70 dbc C65 dbc +45 dbm +41 dbm +65 dbm +55 dbm +50 dbm preamp level distortion shi preamp on (option p03, p08, p13, p26) 10 mhz to 1.8 ghz 1.8 to 13.25 ghz C45 dbm C50 dbm C78 dbc, nominal C60 dbc, nominal +33 dbm, nominal +10 dbm, nominal third-order intermodulation distortion (toi) (two C30 dbm tones at input mixer with tone separation > 5 times if preflter bandwidth, 20 to 30 c, see specifcations guide for if preflter bandwidths) distortion toi toi (typical) 10 to 100 mhz 100 to 400 mhz 400 mhz to 1.7 ghz 1.7 to 3.6 ghz 3.6 to 26.5 ghz C84 dbc C90 dbc C92 dbc C92 dbc C90 dbc +12 dbm +15 dbm +16 dbm +16 dbm +15 dbm +17 dbm +20 dbm +20 dbm +19 dbm +18 dbm preamp on (two C45 dbm tones at preamp input) 10 to 500 mhz 500 mhz to 3.6 ghz 3.6 to 26.5 ghz C98 dbc, nominal C100 dbc, nominal C70 dbc, nominal +4 dbm, nominal +5 dbm, nominal C15 dbm, nominal 1. n is the lo multiplication factor.
10 | keysight | N9020B mxa x-series signal analyzer, multi-touch - data sheet dynamic range specifcations (continued) phase noise 1 offset specifcation typical noise sidebands (20 to 30 c, cf = 1 ghz) 10 hz 100 hz 1 khz 10 khz 100 khz 1 mhz 10 mhz C91 dbc/hz C113 dbc/hz C116 dbc/hz C135 dbc/hz C80 dbc/hz, nominal C100 dbc/hz C112 dbc/hz, nominal C114 dbc/hz C117 dbc/hz C136 dbc/hz C148 dbc/hz, nominal 1. for nominal values at other center frequencies, refer to figure 1. figure 1. nominal phase noise at different center frequencies
11 | keysight | N9020B mxa x-series signal analyzer, multi-touch - data sheet powersuite measurement specifcations channel power amplitude accuracy, w-cdma or is95 (20 to 30 c, attenuation = 10 db) 0.82 db ( 0.23 db 95th percentile) occupied bandwidth frequency accuracy [span/1000] nominal adjacent channel power adjacent alternate accuracy, w-cdma (aclr) (at specifc mixer levels and aclr ranges) C ms 0.14 db 0.18 db C bts 0.49 db 0.42 db dynamic range (typical) C without noise correction C73 db C79 db C with noise correction C78 db C82 db offset channel pairs measured 1 to 6 acp measurement and transfer time (fast method) 10 ms, nominal ( = 0.2 db) multiple number of carriers measured up to 12 power statistics ccdf histogram resolution 0.01 db +duprqfgvwruwrq maximum harmonic number 10th result fundamental power (dbm), relative harmonics power (dbc), total harmonic distortion in % intermod (toi) measure the third-order products and intercepts from two tones burst power methods power above threshold, power within burst width results single burst output power, average output power, maximum power, minimum power within burst, burst width spurious emission w-cdma (1 to 3.6 ghz) table-driven spurious signals; search across regions C dynamic range C absolute sensitivity 81.3 db C84.5 dbm (82.2 db, typical) (C89.5 dbm, typical) spectrum emission mask (sem) cdma2000 ? (750 khz offset) C relative dynamic range (30 khz rbw) C absolute sensitivity C relative accuracy 78.6 db C99.7 dbm 0.12 db (84.8 db, typical) (C104.7 dbm, typical) 3gpp w-cdma (2.515 mhz offset) C relative dynamic range (30 khz rbw) C absolute sensitivity C relative accuracy 81.9 db C99.7 dbm 0.15 db (88.1 db, typical) (C104.7 dbm, typical)
12 | keysight | N9020B mxa x-series signal analyzer, multi-touch - data sheet general specifcations temperature range operating 0 to 55 c storage C40 to 70 c emc complies with european emc directive 2004/108/ec C iec/en 61326-1 or iec/en 61326-2-1 C cispr pub 11 group 1, class a C as/nzs cispr 11:2002 C ices/nmb-001 this ism device complies with canadian ices-001 cet appareil ism est conforme la norme nmb-001 du canada safety complies with european low voltage directive 2006/95ec C iec/en 61010-1 3rd edition C canada: csa c22.2 no. 61010-1-12 C u.s.a.: ul 61010-1 3rd edition acoustic statement (european machinery directive 2002/42/ec, 1.7.4.2u) C acoustic noise emission C lpa < 70 db C operator position C normal position C per iso 7779 environmental stress samples of this product have been type tested in accordance with the keysight environmental test manual and verifed to be robust against the environ - mental stresses of storage, transportation, and end-use; those stresses include, but are not limited to, temperature, humidity, shock, vibration, altitude, and power line conditions; test methods are aligned with iec 60068-2 and levels are similar to milprf-28800f class 3. power requirements voltage and frequency 100 to 120 v, 50/60/400 hz 220 to 240 v, 50/60 hz power consumption C on C standby 465 w maximum 20 w display resolution 1280 x 768 size 269 mm (10.6 in.) diagonal (nominal) capacitive multi-touch screen data storage internal 80 gb nominal (removable solid state drive) external supports usb 2.0 or 3.0 compatible memory devices weight (without options) net 16 kg (35 lbs), nominal shipping 28 kg (62 lbs), nominal dimensions height 177 mm (7.0 in) width 426 mm (16.8 in) length 368 mm (14.5 in) warranty the mxa signal analyzer is supplied with a standard 3-year warranty calibration cycle the recommended calibration cycle is two years; calibration services are available through keysight service centers
13 | keysight | N9020B mxa x-series signal analyzer, multi-touch - data sheet inputs and outputs front panel rf input C connector type-n female, 50 , nominal external mixing (option exm) C connection port C connector C impedance C functions sma, female 50 , nominal triplexed for lo output, if input, and mixer bias C mixer bias range 10 ma in 10 a step C if input center frequency C narrowband if path C 40 mhz bw if path C 85, 125, or 160 mhz bw if path 322.5 mhz 250.0 mhz 300 mhz C lo output frequency range 3.75 to 14.0 ghz analog baseband iq inputs (option bba) 1 C connectors (i, q, i-bar, q-bar, and cal out) bnc female C cal out C signal C frequency ac coupled square wave selectable between 1 khz and 250 khz C input impedance (4 connectors: i, q, i-, q-) 50 , 1 m (selectable, nominal) C probes supported 2 C active probe C passive probe 1130a, 1131a, 1132a, 1134a 1161a C input return loss C 50 impedance only selected C35 db (0 to 10 mhz, nominal) C30 db (10 to 40 mhz, nominal) probe power C voltage/current +15 vdc, 7 % at 150 ma max, nominal C12.6 vdc, 10 % at 150 ma max, nominal usb ports C master (3 ports) C standard C connector C output current C port marked with lightning bolt C ports not marked with lightning bolt compatible with usb 2.0 usb type-a female 1.2 a (nominal) 0.5 a (nominal) rear panel 10 mhz out C connector C output amplitude C frequency bnc female, 50 , nominal 0 dbm, nominal 10 mhz (10 mhz x frequency reference accuracy) ext ref in C connector C input amplitude range C input frequency C frequency lock range bnc female, 50 , nominal C5 to 10 dbm, nominal 1 to 50 mhz, nominal 2 x 10 C6 of specifed external reference input frequency trigger 1 and 2 inputs C connector C impedance C trigger level range bnc female > 10 k, nominal C5 to 5 v 1. for additional specifcations, please refer to the mxa specifcations guide. 2. for more details, please refer to the keysight probe confguration guides, literature numbers 5968-7141en and 5989-6162en; probe heads are necessary to attach to your device properly and probe connectivity kits such as e2668b, e2669a. or e2675a are required.
14 | keysight | N9020B mxa x-series signal analyzer, multi-touch - data sheet inputs and outputs (continued) rear panel trigger 1 and 2 outputs C connector C impedance C level bnc female 50 , nominal 5 v ttl, nominal monitor output C connector C format C resolution vga compatible, 15-pin mini d-sub xga (60 hz vertical sync rates, non-interlaced) analog rgb 1024 x 768 noise source drive +28 v (pulsed) C connector bnc female sns series noise source analog out C connector bnc female (used with n9063a analog demod app and option yas) usb ports C master, super speed C compatibility C connector C output current C master, stacked with lan C compatibility C connector C output current C slave C compatibility C connector C output current 2 ports usb 3.0 usb type a (female) 0.9 a, nominal 1 port usb 2.0 usb type a (female) 0.5 a, nominal 1 port usb 3.0 usb type-b (female) 0.9 a, nominal gpib interface C connector C gpib codes C gpib mode ieee-488 bus connector sh1, ah1, t6, sr1, rl1, pp0, dc1, c1, c2, c3, c28, dt1, l4, c0 controller or device lan tcp/ip interface C standard C connector 1000 base-t rj45 ethertwist if output C connector C impedance sma female, shared by option cr3 and crp 50 , nominal wideband if output, option cr3 center frequency C sa mode or i/q analyzer C with if bw 25 mhz C with option b40 C with option b85, b1a, or b1x 322.5 mhz 250 mhz 300 mhz conversion gain C1 to +4 db (nominal) plus rf frequency response bandwidth C low band C high band, with preselector C high band, with preselector bypassed 1 up to 140 mhz (nominal) depends on center frequency up to 410 mhz programmable if output, option crp center frequency C range C resolution 10 to 75 mhz (user selectable) 0.5 mhz conversion gain C1 to +4 db (nominal) plus rf frequency response bandwidth C output at 70 mhz C low band or high band with preselector bypassed 1 C preselected band C lower output frequencies 100 mhz (nominal) depends on rf center frequency subject to folding residual output signals C88 dbm (nominal) 1. option mpb installed and enabled.
15 | keysight | N9020B mxa x-series signal analyzer, multi-touch - data sheet i/q analyzer resolution bandwidth (spectrum measurement) range C overall C span = 1 mhz C span = 10 khz C span = 100 hz 100 mhz to 3 mhz 50 hz to 1 mhz 1 hz to 10 khz 100 mhz to 100 hz window shapes flat top, uniform, hanning, gaussian, blackman, blackman-harris, kaiser bessel (k-b 70 db, k-b 90 db and k-b 110 db) analysis bandwidth standard option b25 (standard) option b40 option b85 option b1a option b1x 10 hz to 10 mhz 10 hz to 25 mhz 10 hz to 40 mhz 10 hz to 85 mhz 10 hz to 125 mhz 10 hz to 160 mhz if frequency response (standard 10 mhz if path) if frequency response (demodulation and fft response relative to the center frequency, 20 to 30 c) center frequency (ghz) span (mhz) preselector max. error rms (nominal) 3.6 3.6 < f 26.5 3.6 < f 26.5 10 10 10 na on off 1 0.40 db 0.45 db 0.04 db 0.25 db 0.04 db if phase linearity (deviation from mean phase linearity, nominal) center frequency (ghz) span (mhz) preselector peak-to-peak rms 3.6 3.6 < f 26.5 3.6 < f 26.5 10 10 10 na on off 1 0.4 1.0 0.4 0.1 0.2 0.1 data acquisition (10 mhz if path) time record length C iq analyzer 4,000,000 iq sample pairs sample rate at adc C option dp2, b40 or mpb C none of the above 100 msa/s 90 msa/s adc resolution C option dp2, b40 or mpb C none of the above 16 bits 14 bits option b25 (standard) 25 mhz analysis bandwidth if frequency response (demodulation and fft response relative to the center frequency, 20 to 30 c) center frequency (ghz) span (mhz) preselector max. error rms (nominal) 3.6 3.6 < f 26.5 3.6 < f 26.5 10 to 25 10 to 25 10 to 25 na on off 1 0.45 db 0.45 db 0.051 db 0.45 db 0.05 db if phase linearity (deviation from mean phase linearity, nominal) center frequency (ghz) span (mhz) preselector peak-to-peak rms 0.02 f < 3.6 3.6 f 26.5 3.6 f 26.5 25 25 25 na on off 1 0.6 4.5 1.9 0.14 1.2 0.42 1. option mpb is installed and enabled.
16 | keysight | N9020B mxa x-series signal analyzer, multi-touch - data sheet i/q analyzer (continued) data acquisition (25 mhz if path) time record length (iq pairs) C iq analyzer 4,000,000 iq sample pairs 89600 software 32-bit packing 64-bit packing memory option dp2, b40 or mpb 536 msa 268 msa 2 gb none of the above 4,000,000 iq sample pairs (independent of data packing) sample rate at adc C option dp2, b40 or mpb C none of the above 100 msa/s 90 msa/s adc resolution C option dp2, b40 or mpb C none of the above 16 bits 14 bits i/q analyzer option b40 40 mhz analysis bandwidth, option b40 is automatically included in option b85, b1a or b1x option b40 40 mhz analysis bandwidth if frequency response (demodulation and fft response relative to the center frequency, 20 to 30 c) center frequency (ghz) span (mhz) preselector rms (nominal) 0.03 f < 3.6 3.6 f 8.4 8.4 < f 26.5 40 40 40 na off 1 off 1 0.45 db 0.35 db 0.46 db 0.08 db 0.08 db 0.08 db if phase linearity (deviation from mean phase linearity, nominal) center frequency (ghz) span (mhz) preselector peak-to-peak rms 0.02 f < 3.6 3.6 f 26.5 40 40 na off 1 0.2 5 0.05 1.4 dynamic range (40 mhz if path) sfdr (spurious-free dynamic range) C signal frequency within 12 mhz of center C77 dbc, nominal signal frequency anywhere within analysis bw C spurious response within 18 mhz of center C74 dbc, nominal C response anywhere within analysis bw C74 dbc, nominal data acquisition (40 mhz if path) time record length (iq pairs) C iq analyzer 4,000,000 samples (i/q pairs) 89600 vsa software 32-bit packing 64-bit packing length (iq sample pairs) length (time units) 536 msa 268 msa 2 gb total memory, nominal samples/(span x 1.25), nominal sample rate C at adc C iq pairs adc resolution 200 msa/s 12 bits span x 1.25, nominal 1. option mpb is installed and enabled.
17 | keysight | N9020B mxa x-series signal analyzer, multi-touch - data sheet i/q analyzer option b85/b1a/b1x 85/125/160 mhz analysis bandwidth if frequency response if frequency response (20 to 30 c) relative to center frequency center freq. (ghz) span (mhz) preselector typical rms (nominal) 0.15, < 3.6 85 140 160 na na na 0.6 db 0.6 db 0.17 db 0.25 db 0.2 db (nomimal) 0.05 db 0.05 db 0.07 db 3.6, 8.4 85 140 160 off 1 off 1 off 1 0.73 db 0.8 db 0.2 db 0.35 db 0.3 db (nomimal) 0.06 db 0.06 db 0.07 db > 8.4, 26.5 85 140 160 off 1 off 1 off 1 1.10 db 1.40 db 0.50 db 0.76 db 0.5 db (nomimal) 0.2 db 0.2 db 0.12 db if phase linearity (deviation from mean phase linearity, nominal) center freq. (ghz) span (mhz) preselector peak-to-peak rms 0.03, < 3.6 85 140 160 na na na 1.6 3.9 4.7 0.54 0.85 1.23 3.6 85 160 off 1 off 1 4.2 5.3 0.93 1.73 evm (evm measurement foor) customized settings required, preselector bypassed (option mpb) is installed and enabled case 1: 802.11ac ofdm signal, 80 mhz bandwidth, mcs8, using 89600 vsa software equalization on, pilot phase tracking post eq on carrier frequency, 5.21 ghz; input power, 0 dbm 0.23% (C52.7 db), nominal 0.35% (C49.1 db), nominal (eq on preamble, pilots, and data) (eq on preamble only) case 2: 802.11ac ofdm signal, 160 mhz bandwidth, mcs8, using 89600 vsa software equalization on, pilot phase tracking post eq on carrier frequency, 5.25 ghz; input power, 0 dbm 0.30% (C50.4 db), nominal 0.40% (C47.9 db), nominal (eq on preamble, pilots, and data) (eq on preamble only) dynamic range sfdr (spurious-free dynamic range) C signal frequency within 12 mhz of center C72 dbc, nominal C signal frequency anywhere within analysis bw C spurious response within 63 mhz of center C71 dbc, nominal C response anywhere within analysis bw C69 dbc, nominal full scale (adc clipping) default settings, signal at cf (if gain = low: if gain offset = 0 db) C band 0 C band 1 through 4 C8 dbm mixer level, nominal C7 dbm mixer level, nominal high gain setting, signal at cf (if gain = high) C band 0 C band 1 through 4 C18 dbm mixer level nominal, subject to gain limitations C17 dbm mixer level nominal, subject to gain limitations effect of signal frequency cf up to 3 db, nominal 1. option mpb is installed and enabled.
18 | keysight | N9020B mxa x-series signal analyzer, multi-touch - data sheet i/q analyzer option b85/b1a/b1x (continued) 85/125/160 mhz analysis bandwidth data acquisition (85/125/160 mhz if path) time record length C iq analyzer 4,000,000 iq sample pairs C 89600 vsa software data packing 32-bit 64-bit C length (iq sample pairs) 536 msa (2 29 sa) 268 msa (2 28 sa) 2 gb total memory C length (time units) samples/(span x 1.25) sample rate C at adc 400 msa/s C iq pairs span dependent adc resolution 14 bits real-time spectrum analyzer (rtsa) 1 option rt1 or rt2 real-time analysis real-time analysis bandwidth C option rt1 C option rt2 up to 160 mhz up to 160 mhz analysis bw option determines the max real-time bandwidth analysis bw option determines the max real-time bandwidth minimum detectable signal duration with > 60 db stm 2 ratio C option rt1 C option rt2 11.42 ns 5.0 ns minimum signal duration with 100% probability of frequency mask triggering (fmt) at full amplitude accuracy C option rt1 C option rt2 17.3 s 3.57 s signal is at mask level signal is at mask level minimum acquisition time fft rate supported triggers 100 s 292,969/s level, level with time qualifed (tqt), line, external, rf burst, frame, frequency mask (fmt), fmt with tqt 1. for additional rtsa specifcations, please refer to option rt1/rt2 chapter in the mxa signal analyzer specifcations guide (part number: n9020-90113) 2. stm = signal-to-mask related literature publication title publication number x-series signal analyzers - brochure 5992-1316en N9020B mxa x-series signal analyzer C confguration guide 5992-1254en for more information or literature resources please visit the web: product page: www.keysight.com/find/N9020B x-series measurement applications: www.keysight.com/find/x-series_apps x-series signal analyzers: www.keysight.com/find/x-series
19 | keysight | N9020B mxa x-series signal analyzer, multi-touch - data sheet this information is subject to change without notice. ? keysight technologies, 2016 published in usa, january 19, 2016 5992-1255en www.keysight.com mykeysight www.keysight.com/find/mykeysight a personalized view into the information most relevant to you. three-year warranty www.keysight.com/find/threeyearwarranty keysights committed to superior product quality and lower total cost of ownership. keysight is the only test and measurement company with a three-year warranty standard on all instruments, worldwide. and, we provide a one-year warranty on many accessories, calibration devices, systems and custom products. keysight assurance plans www.keysight.com/find/assuranceplans up to ten years of protection and no budgetary surprises to ensure your instruments are operating to specification, so you can rely on accurate measurements. keysight infoline www.keysight.com/find/service keysights insight to best in class information management. free access to your keysight equipment company reports and e-library. keysight channel partners www.keysight.com/find/channelpartners get the best of both worlds: keysights measurement expertise and product breadth, combined with channel partner convenience. cdma2000 is a us registered certification mark of the telecommunications industry association. www.keysight.com/find/ mxa for more information on keysight technologies products, applications or services, please contact your local keysight office. the complete list is available at: www.keysight.com/find/contactus americas canada (877) 894 4414 brazil 55 11 3351 7010 mexico 001 800 254 2440 united states (800) 829 4444 asia pacifc australia 1 800 629 485 china 800 810 0189 hong kong 800 938 693 india 1 800 11 2626 japan 0120 (421) 345 korea 080 769 0800 malaysia 1 800 888 848 singapore 1 800 375 8100 taiwan 0800 047 866 other ap countries (65) 6375 8100 europe & middle east austria 0800 001122 belgium 0800 58580 finland 0800 523252 france 0805 980333 germany 0800 6270999 ireland 1800 832700 israel 1 809 343051 italy 800 599100 luxembourg +32 800 58580 netherlands 0800 0233200 russia 8800 5009286 spain 800 000154 sweden 0200 882255 switzerland 0800 805353 opt. 1 (de) opt. 2 (fr) opt. 3 (it) united kingdom 0800 0260637 for other unlisted countries: www.keysight.com/find/contactus (bp-01-01-16) www.keysight.com/go/quality keysight technologies, inc. dekra certified iso 9001:2008 quality management system from hewlett-packard through agilent to keysight for more than 75 years, weve been helping you unlock measurement insights. our unique combination of hardware, software and people can help you reach your next breakthrough. unlocking measurement insights since 1939. 1939 the future

▲Up To Search▲

Price & Availability of N9020B

	To Download N9020B Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .